Description Specifications ProFM 10 Element Yagi STL Antenna This YAGI antenna elements 10 narrow-band, built in aluminum elements and boom. The insulators are made of PTFE (Teflon). Due to its construction can withstand 300w connector “”N”” This antenna is recommended for a service of 22 degree DEGREES link. Available frequencies are 300-500 Mhz. This type of antenna is suitable for directional service for stl service. We can offer this antenna in the frequency range 150- 500 Mhz Type: 10-element yagi, directional, Tuned high gain – Frequency range @SWR ≤ 1.2:1: 300-500 MHz _ Bandwith: 2 Mhz – Impedance: 50Ω – Radiation (H-plane): beam width @ -3 dB = 32° @ center freq. – Radiation (E-plane): beam width @ -3 dB = 25° @ center frequency. – Polarization: linear vertical or horizontal – Gain: 12 dB – Maximum Power (CW) @ 30°C: 500 Watts – Earth protection: all metal parts are DC grounded, the inner conductor has a DC short circuit – Connector: N-female WEIGHT: Kg. depending frequency tuning IMPEDANCE: 50 ohm MOUNTING: WHITH STANDARD CLAMP 50-110 mm . FREQUENCY RANGE: 300-500 Mhz DIMENSIONS: depending frequency tuning GAIN: 12 dB (half wave dipole) MATERIALS HARDWARE MOUNTING: STEEL GALVANIZED. TYPICAL V.S.W.R: <1.2:1 ISULATOR: PTFE (TEFLON) MAX. POWER: 500w DIPOLE: ALUMINIUM OR STAINLESS STEEL CONNECTOR TYPE: N WIND LOAD: Kg. 40 Km. 150Hora
