Description Specifications Itel DXVR 3- Digital Audio Changeover/ WatchDog Introducing Itel DXVR 3, a cutting-edge audio changeover device with 3 inputs. Experience seamless audio transition with this innovative technology. Ideal for broadcasters, it ensures uninterrupted audio playback. Upgrade your audio setup with Itel DXVR 3 for professional, glitch-free performance. The DXVR is a Digital audio changeover silence detection and automatic switcher. The MPX signal is decoded into L/R channels by a DSP-based stereo decoder which also provide stereo and RDS subcarriers level metering. The MPX source is considered valid only if the PI code matches with the one stored internally. The user can determine the switching priority of the various sources and the switching timings and thresholds, using the front panel display or with a dedicated software. This unit include a passive emergency bypass, so that any input will be bypassed on its respective output, in case of hardware or software failure. Analog audio input Sampling frequency 48KHz/24bits Input level 12/-12dBu XLR connectors, electronically balanced Digital audio input accepts AES/EBU and SPDIF sample rates from 32 to 96KHz XLR connector with balanced transformer. MPX audio input 0dBu level (2.2Vpp / 775mV RMS 75KHz) BNC Connector, impedance 10K ohm Streaming IP audio input Formats: AACplus, MP3, Ogg Vorbis, G.711, PCM Decoding IP Streaming via TCP, UDP, RTP, Multicast USB Flash Memory Interface Level 12/-12dBu Audio outputs Analog level 12/-12dBu Digital level 0/-12dBu XLR connector, balanced Headphones output 1/4″ front panel jack Output: 100mW RMS over 50 ohm Remote control All functions can be managed remotely with an included software. Power supply 100-240VAC 50/60Hz Physical 1 x 19″ rack unit 44mm x 483mm x 156mm Weight 2Kg
