Description Specifications Tascam CD-6010 Professional CD Player The CD-6010 offers top-of-the-line CD playback for any scenario. Designed with the Broadcast market in mind, this CD-player utilizes a tray-loading design, safety features and an emergency release function to accommodate all situations. By employing the CD-5010B drive, rated highly among audiophiles, the CD-6010 offers high-quality sound that is rarely matched in rack-mounted players. With CD’s still so widely used in the Broadcast, Installation, and Touring markets, the CD-6010 is specified. Another unique feature of the CD-6010 is a monitoring speaker on the front of the unit – perfect for cuing-up tracks straight from the unit if installed in a remote area or closet. The CD-6010 also has 20 points of cue memory, 20 tracks of flash start, and supports Auto Cue, Auto Ready and Incremental Play. Furthermore, it features ±16% pitch control for CD playback speed and up to 100 discs of program memory. A complete compliment of interface ports are found on the rear panel. Both XLR balanced outputs and RCA unbalanced analogue outputs are provided, as well as SPDIF and AES/EBU digital outputs. The CD-6010 can be controlled through RS-232C, parallel control, or an optional RC-3F footswitch. With its variety of ease-of-use, safety and bonus features, the CD-6010 is a prime 2U rack-mountable CD player for any professional application. Features: Highly reliable tray CD player for broadcast, installation or touring applications Audio CD-R/RW, MP3 (192 KBit/s) and WAV playback Flash start capability for up to 20 tracks Numeric keys for track selection and flash start Frame accurate search Memory for up to 20 cue points Skip back function (jump back a few seconds during playback) Auto cue, auto ready, incremental playback, intro check functions Resume function Index search for audio CDs Directory search for MP3 CDs Playback modes include Single, All and Program (up to 99 tracks) Memory for playback programs of up to 100 CDs Repeat modes include Single, All and A–B Selectable interval time between tracks ±16% pitch control Key original function (change speed only) Fade in/out (up to 10 seconds, in 0.5-second steps) Time display (track elapsed / track remain / total remain) Power-on play (timer function) Relay play with multiple units Fader start / event start Lock function to avoid accidental operation Anti-shock memory XLR balanced analogue output (output level may be customized by technical support) RCA unbalanced analogue output Coaxial digital output (SPDIF) XLR AES/EBU digital output Mono output Serial control (RS-232C, D-sub 9-pin) Parallel control port (D-sub 15-pin) Headphones output with dedicated volume control Switchable monitor loudspeaker Last mode memory (Playback mode / Program / Repeat mode / Time display) End Of Message notification Backlit LC display Removable power cable Rack-mountable chassis (2 U) Wireless remote control included (receiver can be disabled if required) Media and formats Device type CD player Compatible discs Compact discs (12cm/8cm, including CD-R discs) Playable disc types CD-A, CD-ROM (ISO9660 LEVEL 1/2/JOLIET format) Playable file formats Audio CD (CD-DA), MP3 (MPEG Audio Layer III), WAV MP3 playback specifications Audio Modes stereo/mono Sampling Frequency 32 kHz/44.1 kHz/48 kHz Bit Rate 32 kbps–320 kbps and VBR WAV playback specifications Sampling Frequency 32 kHz/44.1 kHz/48 kHz Sampling Bit Rate 16 bit Audio CD playback specifications Sampling Frequency 44.1 kHz Sampling Bit Rate 16 bit Number of Channels 2 Analog audio outputs Analog outputs (unbalanced) RCA pin jacks Output impedance 200 Ω Standard output level −10 dBV (0.32 Vrms) Maximum output level 6 dBV (2.0 Vrms) Analog outputs (balanced) XLR-3-32 (1: GND, 2: HOT, 3: COLD) Output impedance 100 Ω Standard Output level 4 dBu (1.23 Vrms) Maximum Output level 24 dBu (12.28 Vrms) PHONES connector 6.3-mm standard stereo jack Maximum output power 45 mW 45 mW or more (THD N 0.1% or less, 32 Ω load) Digital audio outputs Digital output connector (COAXIAL) RCA pin jack Supported signal formats IEC 60958-3 standard for consumer use, IEC 60958-4 for professional use Output impedance 75 Ω Output level 0.5 Vpp Digital output connector (XLR) XLR-3-32 (1: GND, 2: HOT, 3: COLD) Supported signal formats IEC 60958-3 standard for consumer use, IEC 60958-4 for professional use Output impedance 110 Ω Control inputs and outputs REMOTE connector 2.5-mm TRS jack RS-232C connector D-sub 9-pin (female) CONTROL I/O PARALLEL D-sub 25-pin (female) Audio performance Frequency response 20 Hz–20 kHz ±0.5 dB (JEITA) S/N ratio 95 dB or more (JEITA) Dynamic range 95 dB or more (JEITA) Distortion 0.005% or less (JEITA) Channel separation 95 dB or more (1 kHz, JEITA) Power supply and other specifications Power supply AC 100-240 V, 50-60 Hz Power consumption 12.5 W Dimensions (W x H x D) 483 mm x 94 mm x 306 mm Weight 4.9 kg Operating temperature range 5–35 °C Installation angle 15° or less
