USED Sound Devices 442 ENG/EFP Deluxe Field Mixer w/ Bag and Cables

Description This listing is for a USED Sound Devices 442 Mixer with Sound Devices Bag & (3) Cables – Please see pictures for condition, the unit has been tested and works and was regularly serviced at local audio shop. Developed with input from the industry’s top audio engineers, Sound Devices 442 encompasses the audio performance, feature set, and mechanical construction demanded by those who rely on audio gear for their livelihood. The 442 contains four microphone preamplifiers that re-define portable audio performance. With its comprehensive inputs and extensive outputs, including direct outputs per channel, the 442 is at home in small run-and-gun applications as well as large, multiple input productions. The 442 incorporates a complete feature-set into a compact, functional design. All controls are accessible on its three main surfaces; no hidden controls. The high-efficiency power circuitry runs the mixer from either four internal AA batteries or external 5–18V DC. The 442 and 442N, like all Sound Devices professional audio products, are designed to withstand the physical and environmental extremes of field production. Its compact mechanic construction strikes the perfect balance between access to all functions, and portability. Inputs 4 – Balanced 3-pin XLR male mic / line switchable Output 2 – (L/R) Stereo 3-pin XLR female 2 – (L/R) TA3 male Monitor/Headphone Out Phones: 1/4″ TRS Phone female jack 1/8″ (3.5mm) mini female jack ALT I/O Direct Outputs:(1-4) TA3-male outputs Tape Out / Mix Out: TA3-male output, 1/8″ (3.5mm) mini jack Camera Out (RTN A): Hirose connector RTN B: TA3-male output, 1/8″ (3.5mm) mini jack Link Input/Output Mix In: TA3-male input Impedance Inputs: 2k ohms, XLR, mic setting, < 600 ohm Mics 16k ohms, XLR, line setting, < 2k ohm outputs Outputs: 85 ohms (actual), XLR factory Line setting, > = 600 ohm inputs 150 ohms (actual), mic setting, < 600 ohm inputs Gain XLR Inputs: 81dB, mic / 41dB, line line level setting 67dB, mic / 27dB, line -10dB setting Hum & Noise EIN: -126dBu (-128dBV) maximum (22Hz – 22kHz bandwidth, flat filter, trim control fully up) Frequency Response 20Hz – 30kHz, 0.2, -0.5dB, -1dB @ 5Hz and 50kHz typical Distortion 0.007% typical (1 kHz, 4 dBu at line out) 0.09% max (50Hz – 20kHz, 18dBu @ line out, fader fully up) Metering Stereo (L/R) 20 segment, sunlight viewable LED meters Control Voltage Out No Phantom Power 12V, 12V-T & 48V Operating Temperature Operating: -20 degrees to 60 degrees Celsius, 0 to 95% relative humidity (non-condensing) Storage: -40 degrees to 85 degrees Celsius Power 4 – AA alkaline batteries Locking 4-pin Hirose connector, external DC power (5 – 18 VDC) Dimensions 2.1 x 6.5 x 11″ (53 x 165 x 279mm) (HxWxD) Weight 4.5 lbs (2.0 kg)