Axel Tech Macrotel X1 Multimode Phone Hybrid

Description Specifications Video Axel Tech Macrotel X1 Multimode Phone Hybrid The new generation of Macrotel X introduces the AxelTech Multimode Technology. The internal framework based on DSP (Digital Signal Processor) allows to work in real time achieving the highest audio performance. This Technology sets Macrotel X1 Multimode and Macrotel X2 Multimode as cutting-edge equipment in the telephone interface technology and allows managing one or two telephone connections: POTS (Plain Old Telephone Service) landline, VoIP, Bluetooth or GSM (with optional interface). With Macrotel X2 Multimode any technology combination is possible. Audio enhancement features are custom designed to guarantee the best quality in phone calls. Thanks to AxelTech’s ten-year experience in the field of audio processing we should consider this product not a common telephone hybrid but a Telephone Audio Processor able to shape the sound to optimize the yield of every single phone call. In fact the new Macrotel X Multimode series integrate a powerful DSP system that takes care of the telephone signal process: Automatic Gain control (AGC) Echo canceller Hold caller/Attenuator Expander and Compressor Audio Limiter 3 Bands Fully parametric Equalizer The new Macrotel X Multimode range does not require the installation of any software: the unit has an integrated Web server supporting the most popular browsers (Chrome, Firefox, Explorer, Opera, etc.). A simple and intuitive GUI can be accessed through any device: PC, notebook, tablet, smartphone, etc. For services synchronization and logs the Macrotel connects to a NTP server.The main XLR input and output connectors can manage analogue or AES/EBU signals according to the device settings (AES/EBU input/output is optional). A second XLR analogue output is anyway available. In Bluetooth mode the two outputs act like a stereo balanced output. Macrotel X Multimode is able to record the telephone calls audio on a USB flash memory plugged in the USB front panel slot. Audio will be recorded in PCM format with a self-explaining filename based on date/time and can include only the RX audio or both RX and TX signals. Moreover it’s possible to send an RTP-PCM audio stream to an external PC to record the call. This recording can include only the RX audio or both RX and TX signals. A multiple GPIO port allows to manage the device from external equipment, like audio console or PC. System sends “Ring”, “Hold”, “Hook” and “REC” status and manages “Hook”, “Rec”, “Mode” and “Hold” functions. On the front panel an audio meters with 18 LEDs shows the RX and TX audio level of each channel. Additional LEDs show working Mode and Power on. Power supply can be between 90 and 260 V AC – 50/60 Hz: this allows to use it worldwide. MAIN FEATURES Analog and AES/EBU digital inputs and outputs 1 line and 2 lines models POTS/PSTN and GSM Quad Band (option) Integrated web server for remote control Digital AGC processor with 3 bands fully parametric EQ Digital Echo canceller Separate send and receive LAN and USB ports Auto answer and disconnection Balanced XLR I/O (mic/line) Remote control software and dialer HIGHLIGHTS Multi-Line digital telephone hybrid POTS/GSM/VOIP Echo cancellation through a digital process on DSP (POTS) Advanced audio processing functions: AGC, Parametric EQ, Audio filters, Compressor, Expander add Limiter Internal Web Server allows device configuration Automatic setup 1 selectable XLR input: Analog or AES/EBU (AES/EBU is optional) 1 selectable XLR output: Analog or AES/EBU (AES/EBU is optional) 1 balanced XLR analogue output Phone call recording in PCM format on USB support (RX only or RX TX) Front panel Led Meters displaying RX/TX levels Audio stream generation in RTP/PCM format (RX only or RX TX) Front panel LED: Gain RX, Gain TX, Mode “Hook” and “Hold line” lighted buttons 4 GPI interfaces, 4 GPO interfaces Integrated Caller Identifier (CID) – only for VOIP Input and output call logs G711-G722 VOIP audio codecs Local telephone output (POTS)   GENERAL FUNCTIONS The integrated web server allows configuring the Macrotel X parameters through a web interface.Web user-friendly GUI is available on any kind of device: PC, notebook, tablet, smartphone. Macrotel X supports many TCP/IP standards such as HTTP for web GUI and UDP for streaming.Connection to external NTP server (Internal RTC with buffer) for time synch. Ethernet/GPIO connection available. Stainless steel enclosure. Front panel with 22 levels and status LEDs. Power supply: 90-260V AC 50/60 Hz – 10 W (green approach). POTS MODULE Standard RJ11 sockets for connecting the telephone line and external telephone set. Internal DIAL system via DTMF for direct call (no need of an external telephone set). Logs phone numbers of incoming and outgoing calls (date, call time start, call time end). Exporting logs available on USB key. The external telephone set can be release when the telephone hybrid hooks the line. Automatic telephone line hooking (after a settable number of rings). Automatic telephone line release based on the “dropped line” tone (this feature can be disabled). Adjustable AGC, Compressor/Limiter and Equalizer parameters. Adjustable Telephone band (Low or Hi-Cut). VOIP MODULE Standard network RJ45 connector. SIP version 2.0 (RFC 3261). Authentication methods: SIP/IAX Dynamic Registration (Register) | SIP Static IP authentication. Supported audio codecs: G.711u (PCM u) | G.711a (PCM a) | G.722 | G.722.1 24/32. Automatic telephone line hooking (after a settable number of rings). Automatic telephone line release based on the “dropped line” tone (this feature can be disabled). Logs phone numbers of incoming and outgoing calls (date, call time start, call time end). Exporting logs available on USB key. Adjustable AGC, Compressor/Limiter and Equalizer parameters. Supported PBXs and Phone Service Providers Macrotel X1/X1 require interoperability with established VoIP providers. Such services are delivered via either a SIP-based IP PBX or a cloud-based telephone service provider. Each of these services can be quite complex and such complexity is reflected in the difficulties that sometimes arise when configuring AxelTech products to interact with them. AxelTech constantly strives to ensure that its products are as compatible as possible with these types of services, but the continuous and inevitable evolution of firmware and hardware between AxelTech and third-party systems can cause inevitable incompatibilities. It is therefore important to remember that changes made by service providers or by the PBXs themselves can cause compatibility problems with AxelTech products. Below we have listed the PBXs and VoIP service providers that have been used successfully by our customers with our products. This does not mean that these services are fully compatible with those products 100% of the time, as these services are constantly evolving. Rather, it means that at least one AxelTech customer has reported that their system currently interacts successfully with our products. This does not mean that AxelTech has directly tested the compatibility. It is our hope that this document will lead customers who are considering using our products with services other than those listed below, to contact our technical support team before purchasing this service. As stated above, the worlds of PBX and VoIP are complex and ever-changing. This combined with the reality of limited resources prevents us from making our devices compatible with every service in every firmware version. If you have difficulty interacting with your AxelTech product with your PBX or VoIP provider, please contact AxelTech technical support for ideas or alternative solutions. Finally, we will allow the customer to return the AxelTech product and obtain a refund if the device is not compatible with the service he has selected. As of March 2021, the following services are reported as compatible with AxelTech Products: Supported PBXs: Asterix Supported VoIP Providers: Olimon Tel BLUETOOTH MODULE Fully certified Bluetooth version 3.0 audio module, compatible with Bluetooth version 2.1 EDR, 1.2, and 1.1. SIP version 2.0 (RFC 3261). Embedded Bluetooth stack profiles: A2DP and HFP/HSP. Supports iAP profile discovery for iPhone® and iPod® Bluetooth accessories G.711u. Dual-channels differential audio input and output for highest quality audio. Certifications: FCC, IC, CE. Adjustable AGC, Compressor/Limiter and Equalizer parameters. GENERAL Power supply: 90-260 V AC / 47-63 Hz Power consumption: 10 W Dimensions WxHxD: 483 x 44,5 x 140 mm (1 rack unit 19”) Weight: < 2Kg ANALOG AUDIO INPUT Connectors: Balanced on XLR – EMI Suppression Input impedance: 50 KΩ Nominal Input Level (sensitivity): Adjustable via software: -9 dBu  15,0 dBu Level range: –20,0 dBu  20,0 dBu Input level max.: 20,0 dBu CMRR input: >60 dB (20 Hz  20 kHz) DIGITAL AUDIO INPUT (OPTIONAL) Connectors: Balanced on XLR – EMI Suppression Input impedance: 110 KΩ Format: AES3/EBU & SPDIF Sample rate: 32, 44.1, 48, 64, 88.2, 96 KHz Nominal Input Level (sensitivity): From 0,0 dBFs to –24dBFs (0,1dB step) Level range: 0,0 dBFs  -36dBFs ANALOG AUDIO OUTPUT Connectors: Balanced on XLR – EMI Suppression Output impedance: 47 KΩ Output level: Adjustable via software: -9dBu  15,0 dBu Level range: –20,0dBu  20,0dBu Output level max.: 20,0dBu CMRR output: >60dB (20Hz  20kHz) DIGITAL AUDIO OUTPUT (OPTIONAL) Connectors: Balanced on XLR – EMI Suppression Input impedance: 110 KΩ Format: AES3/EBU Sample rate: 32, 44.1, 48, 64, 88.2, 96 KHz Nominal Input Level (sensitivity): From 0,0 dBFs to –24dBFs Level range: 0,0 dBFs  -36dBFs POTS INTERFACE Connectors: 2x RJ11 Line and Telephone set Output impedance: Selectable Bandwidth telephone line 170Hz – 4.6kHz Echo canceller suppression: > 40dB VOIP INTERFACE Protocol: SIP Version 2.0 – RFC 3261 Codec Audio Compatibility: G.711u (PCM u), G.711a (PCM a), G.722, G.722.1 24/32 Authentication Methods: SIP/IAX Dynamic Registration (Register) SIP Static IP authentication BLUETOOTH INTERFACE Compatibility: Fully certified Bluetooth version 3.0 audio module, Fully compatible with Bluetooth version 2.1 EDR Compatible with 1.2 and 1.1 Connection mode: Embedded Bluetooth stack profiles: A2DP and HFP/HSP IOS: Supports iAP profile discovery for iPhone® and iPod® Bluetooth accessories G.711u (PCM u) GENERAL GPIO Inputs/Outputs: 4 GPI 4 GPO Communication Port: 1xLAN Front Panel LEDs: 18 4 2 USB: Type A Operating Temperature: 0°C ÷ 50°C COMMUNICATION Configuration Software: Web Server Password Protection: Yes UDP, TCP, HTTP, SNTP. Yes Supported Network Protocols: HTTP, UDP, TCP, NTP,