AXELTECH Oxygen 3000 Plus 12 Fader Digital Broadcast Console

Description Specifications Versions Video AXELTECH Oxygen 3000 Plus 12 Fader Digital Broadcast Console Oxygen 3000 Plus: much more than a Digital Broadcast Mixer! A full range of powerful features for Radio On-Air and Production available in 3 different formats and flexible configurations: 8, 12 and 16 faders with 1 or 2 Audio I/O Boards and 16 16 or 32 32 Dante I/O. Oxygen 3000 Plus is the best-equipped console of its category: Low Latency, Users Preset, Smart Keys, EQ, Compressors, Telephone Hybrid, HDMI Output, Analogue and Digital I/O, USB, Bluetooth, Dante AoIP, Telco, Presenter Talk Box, Streaming In/Out. The DSP based processing guarantees high-end quality audio and of course you will find the easiness of use that marks all the AxelTech’s products. Oxygen Remoter Software, which enables up to 8 additional virtual faders for a full I/O control is available on Oxygen 3000 Plus as it is, for free, in any Oxygen Digital Console model. Input & Output with 1 Audio I/O Board 5 microphone inputs with Automix 2 stereo analogue inputs, up to 4 Stereo analogue inputs using other input sources 4 stereo analogue outputs 1 built-in telephone hybrid or 1 Telco with GPIO Up to 4 Telco using other input sources 1 Bluetooth audio interface or 1 stereo analogue input 1 digital In (AES/EBU) or 1 USB Input (play) 1 digital Out (AES/EBU) 2 USB audio Input (play) 1 USB audio Output (rec) 1 Streaming In 1 Streaming Out 16 inputs 16 outputs or 32 inputs 32 outputs via Dante (optional) configurable as mono/stereo/telco Input & Output with 2 Audio I/O Boards 10 microphone inputs with Automix 4 stereo analogue inputs, up to 8 Stereo analogue inputs using other input sources 8 stereo analogue outputs 1-2 built-in telephone hybrid or 1-2 Telco with GPIO Up to 8 Telco using other input sources 1-2 Bluetooth audio interface or 1-2 stereo analogue input 1-2 digital In (AES/EBU) or 1-2 USB Input (play) 2 digital Out (AES/EBU) 4 USB audio Input (play) 2 USB audio Output (rec) 1 Streaming In 1 Streaming Out 16 inputs 16 outputs via Dante (optional) configurable as mono/stereo/telco General Fully Digital Broadcast Console for Radio Broadcasting with 8, 12 or 16 faders Knob with A/B Fast source switch or source selection for each fader 4 1 busses (PGM, SUB, Aux1, Aux2, PFL) Near 0 latency (< 0,7 ms I/O) Digital Signals Routing 50×50 matrix with direct Input to Output Assignable Stereo N-1 on any output Complete Remote Control by means of an application replicating the surface Remote configuration and maintenance via Web Interface User-definable Presets & Snapshots 5 bands fully parametric Equalizer on each input Dynamic Processor with expander and compressor section on each microphone input Advanced and configurable Monitor Facilities for Control Room and Studio Customizable RGB colored buttons 7” TFT IPS Graphic Color Display for console configuration Four 2,2” TFT IPS displays for the output levels monitoring 2,2” TFT IPS displays on top of each fader displaying channel status, levels and source name HDMI Out for console status display 2 Timers (Ctrl-Room and Studio microphones on HDMI Monitor) START/ON Buttons for each fader 4 recall Snapshot buttons 4 direct Talkback buttons RGB led Bar for each fader Studio & Control Room Monitor Section 8 customizable Smartkey Buttons 2 customizable Function Keys for each fader TalkBox for guest and presenter (optional) Redundant PSU (optional)   Built In Decoder and Streamer Oxygen 3000 Plus, in addition to analog/digital/AoIP inputs and outputs, are open to integration with the IP world, thanks to the ability to decode two audio streams (each stereo or mono) as input and generate an output audio stream (stereo or mono). Options Redundant power supply Talk Box Dante I/O board RJ45 adapters for: Mic Line In Line Out Telco GPIO Analog Balanced Microphone Inputs Connector RJ45 & XLR Balanced – EMI Suppressed Input Impedance 2,4 KΩ Nominal Input Level (sensitivity) -9/-66 dBu Max Input Level (clipping point) 9 dBu A/D conversion 24 bit / 48 Khz Signal To Noise Ratio (referred to peak level) >110 dB THD N <0,01% Analog Gain Adjustable 0 ÷ 60 dB (3dB step) Phantom Power 48V Analog Balanced Stereo Inputs Connector XLR & RJ45 Balanced – EMI Suppressed Input Impedance 10 KΩ Nominal Input Level (sensitivity) 0 dBu Max Input Level (clipping point) 18 dBu A/D conversion 24 bit / 48 Khz Frequency response /-0,5 dB from 20 Hz to 20 kHz Signal To Noise Ratio (referred to peak level) >110 dB Stereo Separation (referred to peak level) >90 dB THD N <0,002 % Analog Balanced Telco Input Connector RJ45 Balanced – EMI Suppressed Input Impedance 10 KΩ Nominal Input Level (sensitivity) 0 dBu Max Input Level (clipping point) 18 dBu A/D conversion 24 bit / 48 Khz Signal To Noise Ratio (referred to peak level) >110 dB THD N <0,002% Digital Input Connector Balanced on 1 XLR – EMI Suppressed Input Impedance 110Ω Standard AES3 Audio Sample Rate 32/44.1/48/96/192 KHz with SRC Resolution 24 bit Dynamic Range (Converter Values) 124dB Analog Balanced Stereo Outputs Connector RJ45 Balanced – EMI Suppressed Output Impedance 23 Ω, nominal 600 Ω Nominal Output Level 0 dBu Max Output Level (clipping point) 18 dBu D/A conversion 24 bit / 48 Khz Signal To Noise Ratio (referred to peak level) >110 dB Stereo Separation (referred to peak level) >90 dB THD N <0,002 % Dante I/O Sample Rates (16×16 Versions) 44.1/48/88.2/96 kHz Sample Rates (32×32 Versions) 44.1/48/88.2/96 kHz Audio Flows In/Out Up to 32×32 simultaneous streams Digital Audio Formats TDM, I2S Audio Transport Formats Dante Audio over IP, AES67 RTP, SMPTE ST2110-30 RTP (enrolled devices) Sample Bit Depth 16, 24 or 32 bits per sample Audio Buffering Up to 2000 samples per channel Clocking Onboard word clock or external word clock Form Factor Card edge module. 4.5cm x 6cm (1.75” x 2.4”) FPGA High performance Xilinx Spartan6 FPGA Microprocessor Soft-core Microblaze processor Clock High quality, low jitter onboard SiLabs Ethernet Standard RGMII/MII interface for Ethernet PHY or switch chip Power 3.3VDC @ 2W max Physical Connector Mini-PCI Control Interfaces SPI Master and Slave; GPIO; I2C Network RGMII/MII USB Audio Digital I/O Connector USB Type B – EMI Suppressed Playback And Recording Sample Rate SRC 44.1-48 KHz Resolution 16 bit Available Stereo Channels 2 stereo USB – 2 Inputs & 1 Output on each Audio I/O Board Analog Balanced Talkbox Outputs Connector RJ45 balanced – EMI Suppressed Output Impedance 100ohm, nominal 600ohm Nominal Output Level 0dBu Max Output Level (clipping point) 14dBu D/A conversion 24 bit / 48 Khz Signal To Noise Ratio (referred to peak level) >110dB Stereo Separation (referred to peak level) >90dB THD N <0,05% Analog Balanced Telco Output Connector RJ45 Balanced – EMI Suppressed Output Impedance 23 Ω, nominal 600 Ω Nominal Output Level 0 dBu Max Output Level (clipping point) 18 dBu D/A conversion 24 bit / 48 Khz Signal To Noise Ratio (referred to peak level) >110 dB THD N <0,002 % Digital Output Connector Balanced on 1 XLR – EMI Suppressed Input Impedance 110 Ω Standard AES3 Audio Sample Rate 32/44.1/48/96/192 KHz Resolution 24 bit Dynamic Range (Converter Values) 124 dB PSTN Interface Connector RJ11 Transhybrid loss >20 dB System Audio Core Analog Devices ADAU1452 32bit 294 MHz fixed point DSP Audio CODECs Cirrus CS42448 24 bit/192 kHz LAN Connection RJ45 – 1 Gbit Nominal Delay (analog input to analog output) 0,7 ms GPIO Inputs/Outputs 4 GPI/4 GPO on DB9; 4 GPI/2 GPO on Mic2 & Mic3 RJ45; 2 GPO on Out3 & Out4 RJ45; 1 GPI/1 GPO on Telco RJ45 Communication Port 2xUSB type-A, 2xUSB type-B , 1xLAN, 1xHDMI Operating Temperature 0°C ÷ 40°C Dimensions 8 Faders Dimensions (W; H; D) 584 mm; 113,5 mm; 495,5 mm 12 Faders Dimensions (W; H; D) 764 mm; 113,5 mm; 495,5 mm 16 Faders Dimensions (W; H; D) 944 mm; 113,5 mm; 495,5 mm Weight 15 to 25 Kg PSU Type External Universal Switching Power Supply 12V with 4 poles XLR connections – Optional Redundant Power Supply 90-264 VAC / 50-60 Hz / 120 W IVersions Oxygen 3000 Plus 8 Fader 1 Audio I/O Board Oxygen 3000 Plus 8 Fader 1 Audio I/O Board Dante 16 Oxygen 3000 Plus 8 Fader 1 Audio I/O Board Dante 32 Oxygen 3000 Plus 12 Fader 1 Audio I/O Board Oxygen 3000 Plus 12 Fader 1 Audio I/O Board Dante 16 Oxygen 3000 Plus 12 Fader 1 Audio I/O Board Dante 32 Oxygen 3000 Plus 12 Fader 2 Audio I/O Board Oxygen 3000 Plus 12 Fader 2 Audio I/O Board Dante 16 Oxygen 3000 Plus 16 Fader 1 Audio I/O Board Dante 32 Oxygen 3000 Plus 16 Fader 2 Audio I/O Board Oxygen 3000 Plus 16 Fader 2 Audio I/O Board Dante 16