Aqua Broadcast Cobalt C-1000 FM Transmitter 1 KW/ 1000 Watts

Description Specifications Video Aqua Broadcast Cobalt C-1000 FM Transmitter 1 KiloWatt / 1000 Watts Ideal for many broadcast applications as a stand-alone transmitter, or even as an Exciter for larger amplifiers where High quality audio is needed. The COBALT C-1000 is a fully featured FM Transmitter that has superior audio quality and sound clarity thanks to it‘s Direct to Channel Digital technology (DDS). Running on a fully customized LINUX OS system, this low distortion modulator is available on all models within the COBALT family of FM Transmitters. Inputs and outputs include Analog, AES/EBU, Digital MPX (AES192), Ethernet, USB, GPIO, GPS Sync with built in SFN capabilities. Ideal for many broadcast applications as a stand-alone transmitter, or even as an Exciter for larger amplifiers where High quality audio is needed. The COBALT C-1000 is a fully featured FM Transmitter that has superior audio quality and sound clarity thanks to it‘s Direct to Channel Digital technology (DDS). Running on a fully customized LINUX OS system, this low distortion modulator is available on all models within the COBALT family of FM Transmitters. Inputs and outputs include Analog, AES/EBU, Digital MPX (AES192), Ethernet, USB, GPIO, GPS Sync with built in SFN capabilities. An optional DC Input lets you run the COBALT C-1000 on a 48V DC power system and opens further possibilities for off-grid power options. A second PSU can also be specified giving you two independent power inputs in parallel, giving you further confidence that you have a backup Power supply, ready to allow seamless switching if a Power supply id to ever suffer a fault. Radio market beating sound will let you stand out to your listeners, with its built-in 4 band Audio Processor with Bass enhancement, Pilot protection, Wide AGC and a whole bunch of expertly designed modern presets, so you sound great right from the start. The modern design lets you easily read the Ultra-clear RGB display, and the intuitive Joystick controls with Haptic feedback and additional silicon buttons allows fast setup, getting you on the air even faster. The advanced communication package with Intuitive web interface and remote control via Ethernet (https) lets you make changes or monitor the COBALT Transmitter. Full SNMP Version 3 management and the ability to send emails, alerts and monitor audio remotely gives you added confidence knowing you have full control from anywhere in the world on any device with a Web browser. Easy access to all components and software controlled variable fan speed, will guarantee you low cost of maintenance. The highest AC efficiency, a compact design and reduced weight mean low cost of transportation and far the lowest total cost of ownership in its class. Features Dynamic, UECP Compliant RDS Encoder Direct to Digital Synthesized modulation Digital MPX with MPX power Limiter GPS Sync 4 Band Audio Processor Linux OS RGB Screen Ethernet Control SNMP GENERAL Output Power (W) 1000W Range (W) 10-1000W RF Output connector 7/16 DIN (Female) Input ACV @ 50/60Hz 100-240 (277 North America only) Power Connector IEC 13A filtered Temperature controlled fan 1 Power supplies 1 Dimensions WxDxH (inch) 19 x 18 x 2RU (3.5″) Dimensions WxDxH (cm) 48.32x 45.7 x 8.8 Weight 7.2kg / 15.87lb MODULATOR Transmitter type Solid-state FM Stereo transmitter Modulator Direct-to-channel (DDS) RF Output Frequency Range VHF Band II, 87-108MHz RF Frequency Steps 100kHz Frequency Stability ±1 ppm or ±150Hz in 0-50⁰C range with internal 10MHz clock reference FM Modulation Range Capability 75kHz default, 100% modulation user adjustable up to 105kHz 140%), maximum 300kHz RF Power Stability ≤ ± 0.25dB Asynchronous/AM noise ≤ -60dB Synchronous AM s/n ratio ≤ -60dB RF Harmonic and Spurious Suppression Meets ETSI requirements VSWR operation Fully protected against gradual or sudden VSWR conditions. Proportional power reduction from VSWR 1.5:1 STEREO ENCODER Performance 400Hz/1kHz test tones at modulation level ≤75kHz Modes Stereo, Mono L R, Mono L, Mono R Frequency response 20Hz-15kHz ±0.02dB Pre-emphasis 0, 50 or 75μs Pilot tone 19kHz, adjustable level 0-12% Subcarriers suppression ≤ -70dB Stereo separation ≥75dB AES/EBU input, ≥70dB Analogue input Stereo SNR ≥80dB with 75us de-emphasis, ≥75dB without de-emphasis, both inputs Stereo THD N <0.03% Crosstalk ≥70dB, between L R and L-R due to channel matching, both inputs MONO PERFORMANCE Frequency response 20Hz – 15kHz ±0.02dB Pre-emphasis 0, 50 or 75 µs Mono SNR ≥75dB AES/EBU input, ≥70dB Analogue input Mono THD N ≤0.002% analogue input, ≤0.001% AES input, with 75us de-emphasis ANALOGUE MPX INPUT PERFORMANCE Frequency response 10Hz-53kHz ±0.03dB, 53kHz-70kHz ±0.3dB FM SNR 10Hz-53kHz ±0.03dB, 53kHz-70kHz ±0.3dB THD N ≤0.003% with 75us de-emphasis DIGITAL MPX INPUT PERFORMANCE Frequency response -90kHz ±0.005dB FM SNR ≥100dB, with 75us de-emphasis THD N ≤0.001% with 75us de-emphasis AUDIO INPUTS Analogue 2 x XLR female, 10kΩ impedance, level adjustable 0-24dBu Digital 24dBu AES/EBU via RJ45 per StudioHUB , level adjustable -20-0dBFS, sampling rates 32-192 kHz AUDIO OUTPUT Headphones Out 1/4″ (6.3mm) female stereo socket, software adjustable volume, minimum load impedance 16Ω WIDEBAND INPUTS Analogue MPX BNC, 10kΩ impedance, level adjustable 0-12dBu Digital MPX AES/EBU via RJ45 per StudioHUB , level -20-0dBFS, sampling rate 192kHz left channel Analogue RDS BNC, 10kΩ impedance, level adjustable from 0.1-10Vpp WIDEBAND INPUTS Analogue MPX BNC, 10kΩ impedance, level adjustable 0-12dBu Digital MPX BNC, 10kΩ impedance, level adjustable 0-12dBu RDS GENERATOR Type Fully Dynamic RDS/RDS2/RBDS Generator Protocols ASCII commands, UECP protocol and X-Command Multi-port architecture Ports UART over USB-B & Ethernet COMMUNICATION AND CONTROL 10MHz input BNC, 50Ω terminated 1PPS input BNC, 50Ω terminated RF sample output SMA, 50Ω, -30dBc UART over USB USB-B, system control USB 2 x USB-A, storage & FW upgrade Ethernet 1 x RJ45 RS232 DB25 shared connector, system control GPIO DB25 shared connector, 8 x output & 8 x input, all optically isolated. Interlock/RF Mute DB25 shared connector, programmable logic/polarity Analogue voltage output DB25 shared connector, 4-channel 0-5V range ENVIRONMENTAL Altitude 15,000 ft / 4,420m AMSL Temperature range 0 to 45ºC working. -10 to 50ºC storage Humidity 95% @ 35ºC, non-condensing