Description Specifications Alice Timecode Distribution Amplifier The Alice timecode distribution amplifier is a 19” rack mounted unit provides longitudinal timecode via a mixture of connection combinations up to twelve outputs in two banks of six. Each bank of outputs are adjustable via a front panel multi-turn trim potentiometer. The front panel has a large illuminated LCD display showing timecode. The display can also be programmed to show your company name or other message on boot-up. These options can be requested at the time of ordering. Uses include, on-location shooting with PSC cameras and portable audio mixers that require a jammed LTC timecode signal, outside broadcast trucks or fixed installations that require timecode to be sent to vision mixers, EVS, audio mixing desks and studio clocks etc. Available versions: TYPE A: XLR input with 6 XLR and 6 BNC outputs TYPE B: XLR input and 12 XLR outputs TYPE C: BNC input and 12 BNC outputs TYPE D: BNC input and 12 XLR outputs TYPE E: BNC input with 6 XLR and 6 BNC outputs TYPE F: XLR input with 12 BNC outputs Input impedance: internally selectable 20k ohms or 600 ohms balanced Input: common-mode rejection: 60dB typical Frequency response: 20Hz to 20kHz ±0.2dB Phase shift: 20Hz <1° 20kHz<5° Noise: -100dB (RMS 30Hz to 15kHz) at unity gain – Ref 8dBu output Distortion: (THD) 8dBu output: 40Hz 0.006% – 1kHz 0.006% 10kHz 0.02% Output impedance: <1 ohm balanced and floating Minimum load: 600 ohms Gain range: adjustable up to 20dB gain and 10dB loss Max. input level: 28dBu Max. output level: 26dBu into 5k ohms 24dBu into 600 ohms 0dBu = 0.775 volts RMS Mains supply: 85v to 250v AC operation Power consumption: 20VA Case details: 1U 19″ rack mounting, overall depth 165mm Shipping weight: 1.95Kg
