Deva Broadcast DB9000-RX Audio over IP Decoder

Description Specifications Deva Broadcast DB9000-RX Audio over IP Decoder DB9000-RX is an integrated client for IP transmitted digital audio signal. This is a device designed to support HE-AAC and MPEG-1 Layer 3 compressed audio streams and PCM uncompressed stream for audio transmission without quality loss. Decoding takes place in real time by a powerful DSP processor and the output signal is both in digital and analog form. Silence Detector and backup DB9000-RX have built-in backup player for continuous audio play in case of signal loss or connection with server. With the optional Stereo and RDS Encoders, DB9000-RX becomes complete tool for audio rebroadcast. The Stereo Encoder has its own DSP processor which allows generation of fully digital composite MPX signal with high stereo quality. With its RS-232 port, DB9000 could be transformed into Ethernet to RS-232 Redirector, allowing to control any other existing equipment over Internet. DB9000-RX allows you to quickly and painlessly integrate existing audio systems to the Internet. Developed with the thought of easiness of use, DB9000-RX can be managed through a standard Web browser, PC, PDA or other device, making it the best choice for professional and consumer use. Highlights: High Quality HE-AAC (v.1 and v.2) and MPEG-1 Layer 3 Codecs 32 kHz, 44.1, 48 and 96 kHz sample rates support Support of all standard bitrates and VBR as well Shoutcast / Icecast compatible TCP/IP stream Support of all standard bitrates and VBR as well Auto switching to another server in the event of a connection loss * 4 LEDs and Phones output for quick diagnostics IP address pronunciation at startup (through the headphones) Full Control and easy setup with any web browser Entirely Digitally Generated Composite MPX Stereo Signal Optional Digital stereo encoder with pre-emphasis, AGC and equalizer Optional Fully Dynamic RDS encoder UPnP for easy discovery in Local Networks Audio Backup on connection or audio loss SD Card for Audio Backup Storage Ethernet to RS-232 Redirector MPX Limiter Audio decoder Decoder HE-AAC (v.1 and v.2), MPEG-1 Layer 3 or raw PCM Sample rates 32, 44.1 and 48 kHz Bit rates All standard bit rates, including VBR Stream client Type Shoutcast/Icecast compatible TCP/IP client Servers Up to 3 with auto-switch on failure Audio backup Trigger Connection loss or audio silence Threshold Adjustable, -90dBFs to 0dBFs Trigger time Adjustable, 1s to 240s Storage SD Card, up to 2GB Supported encoders HE-AAC (v.1 and v.2), MPEG-1 Layer 3 Supported file types *.MP3, *.AAC, *.M4A, *.M3U Playback modes Alphabetical ascending and descending, Shuffle, Playlist and Shuffled playlist Remote file management Build-in FTP server Analog audio output Connector 2 x XLR, Balanced Frequency response ±0.5dB, 5Hz-20kHz Distortion <0.01% THD N Level 12dBu, user selectable Sample rate Same as the source stream Dynamic range >100 dB Digital audio output Connector XLR Type AES/EBU (IEC 60958) Sample rate 48 kHz Resampling Thru build-in sample rate converter Stereo encoder (option) Type Fully DSP stereo encoding Pre-emphasis 0, 50, 75µs AGC 5 presets, 2 user defined Equalizer 3-Band, ±12dB range Stereo separation >55dB (typically >60dB) Phase Adjust Pilot, L-R, RDS Injection Levels Adjust Pilot, RDS Output Connector BNC, Unbalanced Output Level Adjust Digitally, up to 0dBu Composite MPX Limiter 6 presets, 3 user defined RDS encoder (option) Supported RDS Applications PI, PS, Dynamic PS AF, RT, TP, TA, DI, M/S, PIN, PTY, PTYN Configuration Web interface Automation control Remote TCP console Output Connector BNC, Unbalanced Output Level Adjust Digitally, up to -6dBu Phones audio output Connector 1/4″ (6.3mm) Phone Jack, Stereo Type Headphones User interface Indicators 4 LEDs on front panel, 2 LEDs on rear panel Web interface Full control and status information RS-232 Type TCP/IP to RS-232 Redirector Connector DB-9 Baud rates 9600 to 115200 Password protection Yes Network Connector RJ-45 Type Ethernet Device discovery UPnP support Operating conditions Temperature 10°C – 45°C Humidity < 75%, non-condensing Power requirements Voltage 115/230V AC (internal switch), 18VA Connector IEC320, rear panel Size and Weight Dimensions (W;H;D) 485 x 44 x 180 mm Shipping Weight 540 x 115 x 300 mm / 2.6kg